Crankshaft, Engine

Main Bearing Cap Bolts..... 30 Nm plus an additional 180 ° (1/2 turn), or
Increments of 2 x 90° turns further is permissible.
Replace bolts

Crankshaft
Axial play
new: 0.07 - 0.23 mm
Wear limit: 0.30 mm
Check radial clearance with Plastigage
New 0.02 - 00.06 mm
Wear limit: 0.10 mm

Crankshaft dimensions - Main bearing 59.958 - 59.978 mm
reworking is not permitted