Used Immobilizer Identity With Used Access/Start Authorization Control Module and Engine Control Module

Immobilizer, from 12.06


Used Immobilizer Identity with Used Access/Start Authorization Control Module and Engine Control Module

• All required steps necessary for new installation of all immobilizer components are performed by this program.

• To establish a new identity with used components, note the following:

• Order the ignition key with the new identity before setting up.

• The ignition key with the old identity is still needed when setting up.

New identity immobilizer with used access/start authorization control module and used engine control module.

- Connect Vehicle Diagnosis, Testing and Information System (VAS 5051A).

- In Vehicle Diagnostic, Testing and Information System (VAS 5051A), select operating mode "Guided Fault Finding ".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Immobilizer with download

• Functions

• New identity with old FBS and ECM