New Immobilizer Identity With All New Components

Immobilizer, from 12.06


New Immobilizer Identity with all New Components

• All required steps necessary for new installation of all immobilizer components are performed by this program.

• All new components must be installed in the vehicle for the adaptation.

This test program helps adapt a new set of keys to new components. The immobilizer, electronic steering column lock and engine control modules must be adapted and the keys must be programmed.

- Connect Vehicle Diagnosis, Testing and Information System (VAS 5051A).

- In Vehicle Diagnostic, Testing and Information System (VAS 5051A), select operating mode "Guided Fault Finding ".

- Using the "Go To" button, select "Functions/Component selection" and the following menu options in sequence:

• Body

• Electrical Equipment

• 01 - On Board Diagnostic (OBD) capable systems

• Immobilizer with download

• Functions

• New identity, all components new