Bumper Carrier Assembly Overview

Rear Bumper


Bumper Carrier Assembly Overview

• Due to model variations, small deviations must be considered during removal and installation.





1 Bumper carrier

• Removing:

• Remove bumper cover

2 Adhesion surfaces

3 Reinforcement

• Installed on USA vehicles only.

4 Bolt

• Quantity: 4

• 150 Nm

5 Left foam piece

6 Films

• Qty: 4

• Use self-adhesive film AKL 448 030 05 or AKL 448 300 04 and cut to size using workshop tools.

7 Foam piece

• Self-adhesive

8 Right foam piece

DANGER!
Before installing, check all films - 6 - for damage and replace as necessary. The films seal interior from exhaust fumes.