Rocker Molding

Moldings and Trim


Rocker Molding

Removing





- Fender cover strip, removing and installing, refer to --> [ Fender Cover Strip ] Fender Cover Strip

- Front door cover strip, removing and installing, refer to --> [ Front Door Cover Strip ] Front Door Cover Strip

- Rear door cover strip, removing and installing, refer to --> [ Rear Door Cover Strip ] Rear Door Cover Strip

- Using a plastic wedge, lift out the protective strips - 1 - and - 3 - from the clips - 2 -.

Installing

• The rocker moldings must audibly engage.

• Before installing, check all the fasteners for damage and replace them if necessary.





- Install the protective strips - 1 - and - 3 - onto the clips - 2 - and press on tightly by hand.