Seat Base

Front Seats


Seat Base

• Removal and installation is described for the left-hand side of the vehicle. Removal and installation for the right-hand side is performed in the same manner.

Removing

- Remove belt anchor --> [ Belt Anchor ] Belt Anchor.

- Remove front seat:

• Remove 12-way seat --> [ Front Seat ].Front Seat

- Fold back 2 flaps in floor covering - 1 -.

- Remove two bolts - 2 - and - 3 - (45 Nm) respectively.

• The bolts are microencapsulated and must therefore be replaced after every removal.

• Before installing the new bolts, the threads of the corresponding nuts must be cleaned.

- Lift seat base out of vehicle.





Installing

- Perform the steps used for removal in reverse order.