Air Cleaner Housing: Service and Repair

Air Filter, Assembly Overview

Connection to compressor for air suspension, separating --> [ Air Suspension Compressor Connection, Separating ] Air Suspension Compressor Connection, Separating





1 Intake tube

2 Spring-type clip

3 Intake tube

4 6 Nm

5 Mass Air Flow (MAF) Sensor (G70) with Intake Air Temperature (IAT) Sensor (G42)

6 Seal

• Replace if damaged

7 Air filter upper part

• On right side with connection to Secondary Air Injection (AIR) Pump Motor (V101)

8 Filter element

9 To Secondary Air Injection (AIR) Pump Motor (V101)

10 Air duct

• Secured to lock carrier

11 Rubber bushing

• Clipped into longitudinal member

12 Air filter lower part

• To remove right lower part of air filter, the bracket for the right engine cover must be removed --> [ Removing bracket for right engine cover ]

13 10 Nm

14 Connection from compressor for air suspension

• Removal --> [ Air Suspension Compressor Connection, Separating ] Air Suspension Compressor Connection, Separating

Removing bracket for right engine cover





- Press in retaining tab - 1 - from below and pull out bracket in direction of - arrow -.