Fuel Supply System

Fuel Supply System

CAUTION!
When doing any repair work, especially in the engine compartment, pay attention to the following due to clearance issues:

• Route lines of all types (e.g. for fuel, hydraulic, EVAP canister system, coolant and refrigerant, brake fluid, vacuum) and electrical wiring so that the original path is followed.

• To prevent damages to the lines, make sure there is sufficient clearance to all moving or hot components.

• Hose connections are secured with couplings or spring-type or clamp-type clips.

• Always replace clamp-type clips with spring-type clips.

• Fuel hoses at engine must only be secured with spring-type clips. The use of clamp or screw type clips is not permissible.

• Spring-type clip pliers (VAS 6340) or hose clip pliers (VAS 5024 A) are recommended for installing spring-type clips.