Camshaft Bearing

Camshaft Bearing Cap





Install bearing caps - 3 -, - 5 - and - 7 - according to markings and fasten new bolts alternately in a diagonal sequence.
Torque specification 5 Nm + 1/4 turn (90°)

Tighten the camshaft adjuster - 10 -.
Torque specification 5 Nm + 1/4 turn (90°)

Lightly coat the double bearing cap - 6 - and the bearing cap - 1 - with sealant AMV 188 001 02 and install the bearing caps.
Torque specification 5 Nm + 1/4 turn (90°)

Install the remaining bearing caps.
Torque specification 5 Nm + 1/4 turn (90°)