Ignition Key - Emergency Release Procedure

94 06 22

Dec. 11, 2006

2010565 Supersedes T.B. Group 94 number 04-03 dated November 19, 2004 due to inclusion into ElsaWeb





Vehicle Information

Condition

Ignition Key, Emergency Release Revision

In the event a customer contacts your dealership requesting assistance with ignition key emergency release, the following procedure describes proper steps for key removal.

Technical Background

Vehicle owner's manual omits "Apply parking brake" step from ignition key emergency release procedure

Production Solution

No production change required

Service





Vehicles built up to the VINs shown.

Vehicles built after above VINs do not have this emergency release feature.





^ Switch ignition OFF

^ Move transmission selector lever to "P" (Park)

^ Fully engage parking brake.

^ Remove cover -arrow- if equipped.





^ Press emergency release button -arrow- using pen or similar tool

^ With emergency release button pressed down, turn ignition key counterclockwise and remove.

Warranty

Information only.

Required Parts and Tools

No Special Parts required. Always see ETKA for the latest part(s) information.

No Special Tools required.