Rear Bumper Cover, Removing and Installing

Rear Bumper Cover, Removing And Installing







Removing
- Loosen bumper cover - 1 - in area of wheelhousing (bolts - 3 -).
- Removing tail light assembly.
- Disconnect connector (below left tail light assembly) for license plate light (Golf only).
- Remove bolts - 5 -. For Jetta, remove additional bolt - 7 -.
- Remove bumper cover - 1 - from guide pieces - 2 - (left and right sides) and mounting strip - 4 -.
- Remove impact strip - 6 - if necessary

Installing
Installation is performed in reverse order of removal.