Rear Door: Locations

Rear Door, Assembly Overview

Bolts for door hinges must always be replaced after loosening.







1. Door
2. Door handle with backing plate
3. Housing
4. Bolt
- 20 Nm
5. Cover cap
6. Locking knob
7. Locking rod
8. Bell crank
9. Locking rod
10. Bolt
- 20 Nm
11. Closure plate
12. Door lock
13. Bowden cable
14. Interior door mechanism
15. Bolt
- M8x28
- Only this bolt must be removed to remove door from hinge
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolt after loosening
16. Bolt
- M8x28
- Only this bolt must be removed to remove door from hinge
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolt after loosening
17. Door hinge with door arrester
- Hinge is divided
18. Bolt
- M8x28
- Installed from vehicle interior side
- Remove lower B-pillar trim.
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolts after loosening
19. Bolt
20. Bolt
- M8x28
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolts after loosening
21. Cover cap
22. Bolt
- 13 Nm
23. Door hinge
- Hinge is divided
24. Bolt
- M8x22
- Installed from vehicle interior side
- Remove lower B-pillar trim
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolts after loosening
25. Bolt
- M8x28
- 20 Nm + 1/4 turns (90 degrees) turn
- Always replace bolts after loosening