Power Locks: Locations

Comfort System And Central Locking System, Assembly Overview







1. Coupling station
- Component location: Lower A-pillar, covered by footwell trim.
- Remove lower A-pillar trim.
2. Door control module, RF
- Only for comfort system
- Integrated in window regulator motor

- Removing
- Removing door trim.
- Removing front carrier assembly.
- Remove window regulator motor.

3. Door lock, RF
- Door lock is secured to carrier assembly
- Electrical central locking system is integrated in door lock module

- Removing
- Removing door trim Body Interior.
- Removing front carrier assembly.
- Remove door lock.

4. Coupling station
- Component location: B-pillar
- Remove lower B-pillar trim.
5. Door control module, RR
- Only for comfort system
- Integrated in window regulator motor

- Removing
- Removing door trim.
- Remove window regulator motor.

6. Door lock, RR
- Door lock is secured to carrier assembly
- Electrical central locking system is integrated in door lock module

- Removing
- Removing door trim.
- Remove door lock.

7. Motor for fuel tank lid unlock V155
- Component location: under C-pillar trim
- To remove, luggage compartment trim up to wheelhousing must be removed.
- Can be removed using Socket wrench T10010
8. Rear lid lock
- Screwed onto lid

- Removing
- Remove rear lid trim.
- Remove lid lock.

9. Rear lid actuator
- Installed onto lid
- Can be removed using Socket wrench T10010
10. Door lock, LR
- Door lock is secured to carrier assembly
- Electrical central locking system is integrated in door lock module

- Removing
- Removing door trim.
- Remove door lock.

11. Coupling station
- Component location: in area of rear roof crossmember, covered by roof trim
- Removing roof trim.
12. Anti-theft alarm horn
- Component location: in area of C-pillar, covered by C-pillar trim
13. Door control module, LR
- Only for comfort system
- Integrated in window regulator motor

- Removing
- Removing door trim.
- Removing rear carrier assembly.
- Remove window regulator motor.

14. Coupling station
- Component location: B-pillar
- Remove lower B-pillar trim.
15. Door lock, LF
- Door lock is secured to carrier assembly
- Electrical central locking system is integrated in door lock module

- Removing
- Removing door trim.
- Removing front carrier assembly.
- Remove door lock.

16. Operating unit
- Installed in door trim

- Removing
- Removing door trim.

17. Door control module, LF
- Only for comfort system
- Integrated in window regulator motor

- Removing
- Removing door trim.
- Removing front carrier assembly.
- Remove window regulator motor.

18. Antenna for remote control
- Under left, A-pillar trim

- Removing
- Remove A-pillar trim.

19. Coupling station
- Component location: Lower A-pillar, covered by footwell trim.
- Remove lower left A-pillar trim.
20. Central module
- Bolted on under instrument cluster with bracket at steering column
- To remove, lower steering column trim must be removed beforehand.
21. Hood lock
- Contact switch for ATWS
- Component location: in lock carrier
- Removing hood lid lock.