Procedures

Engine, securing to assembly stand
When working on the engine, it must be secured to support clamp VW 313 using engine and transmission bracket VW 540.

Work sequence
- Remove transmission.

Vehicles with automatic transmission
- Secure torque converter to prevent it from falling out after separating engine from transmission.

Continuation for all vehicles





- Attach lifting tackle 2024 A as follows and lift off engine/transmission jack V.A.G 1383 A with workshop crane.
Belt pulley end: 2nd hole on support bar in position 1
Flywheel end: 4th hole on support bar in position 8

CAUTION! The hooks and locating pins must be secured with locking pins.

Note:
^ The positions marked 1 to 4 on the bar must be toward the belt pulley end.
^ The holes in the hook rails are counted up from the hook.

- Secure engine to support clamp VW 313 using engine and transmission bracket VW 540.

Note: First loosen coolant pipe at flywheel end.