Upper Transverse Link

Upper Transverse Link

Removing

• Always replace guides with cable as a pair.

- Removing sunroof glass panel. Refer to => [ Sunroof with Glass Panel ] Sunroof with Glass Panel.

- Remove sunroof drive motor. Refer to => [ Sunroof Glass Panel Drive Motor ] Sunroof Glass Panel Drive Motor.

- Removing installation unit. Refer to => [ Installation Unit ] Installation Unit.

- Remove slotted guide rail. Refer to => [ Slotted Guide Rail ] Slotted Guide Rail.

- Using a screwdriver, carefully disengage rain channel - 1 - in - direction of arrow - on both sides at bearing on guide retaining tabs - 2 - and remove rain channel.





- Disengage clip mechanisms - arrows - of upper end piece - 1 - from lower end piece - 2 - using a screw driver and pull it upward and off.





- Slide lower part of rear guide - 1 - in - direction of arrow - in guide rail - 3 - until the lock mechanism of guide catch - 2 - is released.





- Pull lower part of rear guide - 1 - and guide catch - 2 - together in - direction of arrow - out of guide rail - 3 -.

Installing

Installation is performed in the reverse order of removal.