Diagram 46/18 (Tracks 225-238)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Instrument Cluster Control Module, Data Bus On Board Diagnostic Interface





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

J285 - Instrument Cluster Control Module Component Locations Locations

J519 - Vehicle Electrical System Control Module Component Locations Locations

J533 - Data Bus On Board Diagnostic Interface Component Locations Locations

T20 - 20-Pin Connector

T36 - 36-Pin Connector

(B383) - Powertrain CAN-Bus High Connection 1 (in main wiring harness)

(B390) - Powertrain CAN-Bus Low Connection 1 (in main wiring harness)

(B397) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

(B406) - Comfort System CAN-Bus High Connection 1 (in main wiring harness)

Previous Diagram 46/17 (Tracks 211-224)

Next Diagram 46/19 (Tracks 239-252)