With Connection Couplings

With Connection Couplings

CAUTION!
Connector coupling sealing ring can be damaged if securing clamp is in locked position when installing. This would result in a leak. Follow assembly instructions.

• All hose connections for charge air system are secured by spring-type clamps or by connector couplings. For connector couplings, always note the following points:

Removing

- Release the connection coupling by pulling the securing clip - arrow -.





- Separate hose/tube without assistance from tools.

Installing

- When installing, make sure that the retaining tabs - A - are securely engaged.

- When replacing sealing ring, lay ring in charge air hose groove. Ensure gasket is completely seated in groove all the way around.

- Oil sealing surfaces and sealing ring.

- Bring securing clip into release position - 1 -.





- Slide charge air hose into clutch as far as stop.

- Bring securing clip into lock position - 2 - and then press charge air hose back again.

- Check for correct seating and proper locking of connector by pulling on hose.