Cylinder Head Assembly: Locations

Cylinder head, assembly overview





1- Cap
2- 10 Nm
3- Cylinder head cover
4- Gasket for cylinder head cover
^ Replace if damaged
^ Before installing, coat contact surfaces of bearing cap or camshaft adjuster/chain tensioner to cylinder head with Sealant AMV 174 004 01 and (Part numbers are for reference only. Always check with your Parts Department for the latest part number information).
5- Oil deflector
^ Note installation position: Above intake camshaft
6- Cylinder head
^ After replacing replace entire amount of coolant
7- Intake manifold gasket
^ Replace
8- Cylinder head gasket
^ Note installation position: Identification: Part number must be visible from intake side
9- Toothed belt
^ Mark direction of rotation before removing
10- Gasket for exhaust manifold
^ Replace
11- Cylinder head bolt
^ Replace
12- Gasket
^ Replace if damaged





Checking cylinder head for distortion

Special tools, testers and auxiliary items required
^ Straight edge
^ Feeler gauge

Max. permissible distortion: 0.1 mm