Procedures

Engine, securing to assembly stand
Secure engine to holding fixture VW 313 of assembly stand using engine and transmission holder VW 540 when performing repair work.

Work procedure
- Remove transmission.

Vehicles with automatic transmission
- After separating engine from transmission, secure torque converter to prevent it from "falling out".

Continuation for all vehicles





- Engage Engine Sling 2024 A with Retainer 3180 as follows and raise with Shop Crane V.A.G 1202 from engine/transmission jack V.A.G 1383 A.
Belt pulley side: 3rd hole of rail in position 1.
Flywheel side: 2nd hole of rail in position 5.

CAUTION! Use securing pins at hooks and pins.

Note:
^ The peg positions on the carrying strap marked with 1 to 4 face the belt pulley.
^ The bores in the hole rail are counted from the hook.





- Fasten engine using holding fixture VW 540 to holding fixture VW 313.