A/C Control Head-E87- With Climatronic Control Module -J255-, Removing and Installing

A/C Control Head-E87- With Climatronic Control Module -J255-, Removing And Installing

CAUTION:
Before beginning repairs:
- Switch off all electrical consumers.
- Switch off ignition.
- Remove ignition key from ignition switch.

NOTE: Climatronic Control Module -J255- and A/C Control Head -E87- are integrated into a single unit that cannot be serviced separately.

Removing







- Using a screwdriver with a protected tip. carefully unclip control head trim at locations indicated by -arrows-.







- Remove instrument panel screws -arrows-.
- Pull out A/C control head.
- Disconnect electrical connectors.
- Remove A/C control head with control module.

Installing
- Install in reverse order of removal, noting the following:
- Through m.y. 2001: Code control module, function 07, and then initiate Basic setting, function 04 using VAG 1551 or VAS 5051.
- From m.y. 2002: Code control module, function 07, and then initiate Basic setting, function 04 using VAS 5051.