Components, Checking and Adjusting With VAS 5051

Components, Checking And Adjusting With VAS 5051

All OBD functions are possible using the VAS 5051 tester. Proceed as follows:
- Connect VAS 5051 to vehicle Data Link Connector (DLC), select mode "Guided Fault Finding"
- Enter appropriate model, equipment and model year information and press ">" to confirm.

After all control modules have been registered and DTC memories checked,
- Press "Go to"
- Select "Function/Component Selection"
- Select "Body"
- Select "Heating, ventilation, air conditioning"
- Select "Systems capable of self-diagnosis"
- Select "Climatronic"

Review displayed listing, choose and press ">" to confirm.
- Selecting "Function" allows access to "Basic settings", " Code control module", "Check cooling performance" etc.
- Selecting "Electrical Components" provides specific component function tests etc.