Evaporative Emissions System Components, Servicing

Evaporative Emissions System Components, Servicing







NOTE:
- Components marked with an * are checked by the On Board Diagnostic (OBD).
- Components marked with ** are checked by the Output Diagnostic Test Mode

1. From Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-*/**
2. Seal
- Replace if damaged
3. Vent pipe
4. Connection piece
5. Connector
- 3 pin
6. Vacuum pipe
- for throttle valve control module.
7. Leak Detection Pump (LDP) -V144-*/**
- In right rear wheel well
8. Connecting hose
- Pressure side
9. 3 Nm
10. Air cleaner for LDP
11. Connecting hose
- Suction side
12. Retainer
13. 10 Nm
14. EVAP canister.
- In right rear wheel well