Basic Setting, Initiating

Basic setting, initiating, 09A, 5 Spd. A/T

Note: The basic setting should be initiated after performing the following repairs.
^ Replacing engine
^ Replacing or coding engine control module
^ Removing and installing transmission
^ Removing and installing electronic accelerator
^ Replacing automatic transmission control module -J217-

- Connect V.A.G 1551 Scan Tool and enter address word 02 Transmission electronics and advance until "Select function XX" appears in the display.





Indicated on display:
- Press keys 0 and 4 to select function Initiating basic setting.

Accelerator pedal must remain in idling position.





Indicated on display
- Confirm entry with key Q.





Indicated on display
- Press key 0 three times.
- Confirm entry with key Q.





Indicated on display
The system is now in the basic setting.
- Depress accelerator pedal as far as kickdown and hold in this position for 3 seconds.
- Press key ->





Indicated on display