Installation Position of Gear Selector Mechanism

Installation position of gear selector mechanism, 02J, 5 Spd. M/T





A - Gear change cable
B - Gate selector cable
C - Heat shield
^ Remove before removing the gear selector mechanism.
Arrow -A- Gear selection movement
Arrow -B- Gate selection movement

1 - Gear selector lever
2 - Relay lever





I - Removing and installing selector lever and boot
II -Servicing gear lever and gear lever housing
III -Assembly overview: Removing and installing operating cables

Note:
^ Before working on the selector mechanism, disconnect the battery ground strap in the engine compartment.
^ Note radio code on vehicles with coded radio.

Special tools and equipment required

V.A.G 1331 Torque wrench:

V.A.G 1275 Pliers: