Shift Lever Knob and Boot, Removing and Installing

Shift Lever Knob and Boot, Removing and Installing, 02J, 5 Spd. M/T






1 - Selector lever knob
^ Screw on and off together with gaiter

2 - Boot
^ Separating from gear shift knob => Fig. 1
^ Connect to gear shift knob before installing Fig. 1
^ Remove and install together with gear shift knob

3 - Sleeve
4 - Clamp
^ To secure gear shift knob on gear lever

5 - Frame
6 - Sound insulation





Fig. 1 Separating cover from gear shift knob and assembling to gear shift knob

- Turn boot inside out.
- Carefully pry clamping sleeve (arrow) off with a screwdriver and pull gear shift knob out.

Installation is carried out in the reverse sequence. Also, note the following:
- Insert gear shift knob in cover.
- Push clamping sleeve onto gear shift knob and engage.
- Install gear shift knob and boot together.