Installed Position of Gear Selector Mechanism

Installed position of gear selector mechanism, 02M, 5 and 6 Spd. M/T





A - Gear change cable
B - Gate selector cable
C - Heat shield
^ Remove before removing the gear selector mechanism.
Arrow -A- Gear selection movement
Arrow -B- Gate selection movement

1 - Gear selector lever
2 - Relay lever





I - Removing and installing shift knob and cover
II - Servicing shift lever and shift housing
III - Assembly overview: Removing and installing operating cables

Note:
^ Before working on the selector mechanism, disconnect Ground (GND) strap from the battery in the engine compartment.
^ Note radio code on vehicles with coded radio.

Special tools and equipment

VAG 1331 Torque wrench or equivalent:

VAG 1275 Pliers: