Steering Wheel, Removing and Installing

Steering Wheel, Removing And Installing

Removing
- Remove driver side airbag unit.
- Three-spoke steering wheel.
- Four-spoke steering wheel.
- Turn steering wheel - 1 - to center position (wheels in straight-ahead position).







- Remove bolt - 2 - and pull steering wheel off steering column.

Installing
- Set steering wheel - 1 - on steering column.
- Center markings for steering wheel and steering column must align.
- Spiral spring connecting socket and studs must be positioned into designated holes in steering wheel base.
- Secure steering wheel with bolt - 2 -, tightening torque is 55 Nm.
- Mark bolt with punch indentation after each loosening procedure.







- If five punch indentations are on bolt, it must be replaced with a new one.