ATF Level, Topping Up

ATF level, topping up, 01M, 4 Spd. A/T
- Pry off plug securing cap (arrow) with a screwdriver. Cap locking device will be damaged, therefore always replace cap.





- Remove plug from filler pipe.





- Fill with ATF using V.A.G 1924, until ATF runs out of level hole (arrow).

Note: An insufficient ATF filling as well as filling to excess affects the function of the transmission.





- Install new seal to level plug (arrow -1-) and tighten to 15 Nm.
- Install plug on filler pipe and secure with a new cap (arrow -2-).
- Lock cap.

Note: Always replace cap. The cap secures the sealing plug.