II - Reverse Gear Clutch -K2- to Large Sun Gear, Removing and Installing

II - Reverse gear clutch -K2- to large sun gear, removing and installing, 01M, 4 Spd. A/T





1 - Reverse gear clutch -K2-
2 - Shim
^ Determining thickness go to Adjusting clutch play between -K1- and -K2-
^ 1 or 2 shims can be installed

3 - 1st to 3rd gear clutch -K1-
^ Spare part is determined according to transmission code letters
^ Clutches -K1- and -K3- are pressed together

4 - Seal
^ Always replace
^ To replace press -K1- off -K3-

5 - 3rd and 4th gear clutch -K3- with turbine shaft
^ Spare part is determined according to transmission code letters
^ Disassembling and assembling
^ Clutches -K1- and -K3- are pressed together
^ Two different types

6 - 1st to 3rd gear clutch -K1- with 3rd and 4th gear clutch -K3-
^ Clutches -K1- and -K3- are pressed together
^ Pressing -K1- off -K3-
^ Pressing -K1- onto -K3-

7 - Axial needle bearing with washer
^ Axial needle bearing faces small input shaft

8 - Small input shaft
9 - Needle bearing
10 - Axial needle bearing
11 - Large input shaft
12 - Axial needle bearing
13 - Axial needle bearing washer
^ With shoulder

14 - Large sun wheel
15 - Axial needle bearing
16 - Axial needle bearing washer
17 - Transmission housing with freewheel and circlips installed