Hydraulic System, Assembly Overview

Hydraulic system, assembly overview, 02J, 5 Spd. M/T





1 - Brake fluid reservoir
2 - Supply hose
3 - Master cylinder
4 - Retainer
^ Replace only with master cylinder removed
^ Removing go to Fig. 1
^ Pressing on go to Fig. 2

5 - Clutch pedal
6 - Self-locking hex nut, 25 Nm
^ Always replace

7 - Seal
^ Pull onto line/hose connection
^ Insert with brake fluid

8 - Line/hose assembly
^ Allocate using parts catalog

9 - Bracket
^ Secured to body

10 - Dust cap
11 - Bleed valve
12 - Slave cylinder
^ Before removing the slave cylinder:
- Remove gear selector cable from gear selector lever
- Remove relay lever and actuating arm for gate selector cable

13 - Collared securing bolt, 25 Nm
14 - Transmission
15 - Clip
16 - Seal
^ Pull onto line/hose connection
^ Insert with brake fluid

17 - Support bracket
18 - Hose bracket
^ Secure to control cable/gear selector cable support bracket

19 - Clip





Fig. 1 Pry retainer -A- off in direction of arrow





Fig. 2 Press master cylinder operating rod in retainer -A- in direction of arrow