ABS ITT Mark 20 IE

Multi-pin connector with contact assignment

Note: All contacts not listed are currently not assigned and must never be connected to other components!





Contact assignment of connectors for voltage supply and On Board Diagnostic (OBD) with V.A.G 1551 Scan Tool

Contact assignment of connectors for voltage supply and On Board Diagnostic (OBD) with V.A.G 1551 Scan Tool:

Contact assignment of connector T25 wiring harness/ABS control module (w/E DL) -J104-

Contact assignment of connector T25 wiring harness/ABS control module(w/EDL) -J104:

Contact assignment of connector T25 wiring harness/ABS control module (w/EDL) -J104- (Part 2):

Test step overview

Test step overview (Part 1):

Test step overview (Part 2):

1) All-wheel drive vehicles with Haldex coupling only.