Diesel Direct Injection System, Component Locations Overview

Diesel Direct Injection System, Component Locations Overview

Components A to D are not shown on the illustration.







A Brake pedal switch -F47-
- In footwell on brake pedal
B Brake light switch -F-
- In footwell on brake pedal
C Throttle Position (TP) sensor -G79-
- In footwell on accelerator
D Clutch vacuum vent valve switch -F36-
- In footwell on clutch pedal

1. Variable intake manifold flap
- With Motor for intake flap -V157-
2. EGR vacuum regulator solenoid valve -N18-
3. Intake Manifold Runner Control (IMRC) valve -N316-
4. Exhaust gas recirculation (EGR) cooler switch-over valve -N345-
5. Wastegate bypass regulator valve -N75-
6. Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-
- With Barometric pressure (BARO) sensor -F96-
- Replacing Engine control module
7. Positive Crankcase Ventilation (PCV) heating element -N79-
8. Engine Coolant Temperature (ECT) sensor -G62-
- For engine control module
- With Engine Coolant Temperature (ECT) sensor -G2-.
- If necessary, release pressure in cooling system before removing
9. Mass Air Flow (MAF) sensor -G70-
10. Connector
- For unit injector ( -N240-...-N243-)
11. Engine speed (RPM) sensor -G28-
12. Fuel temperature sensor -G81-
13. Connector
- For Camshaft Position (CMP) sensor -G40-
14. Connector For Engine speed (RPM) sensor -G28-
15. Camshaft Position (CMP) sensor -G40-
16. Manifold Absolute Pressure (MAP) sensor -G71- with Intake Air Temperature (IAT) sensor -G72- Temperature (IAT) sensor -G72-