Parallel Running, Adjusting

Parallel Running, Adjusting

NOTE: The parallel running adjustment can only be undertaken when the drive and glass panel are removed (in "0"position).

- Removing sliding/tilting sunroof drive.







- The mark - arrow - on the rear of the guide upper part - 1 - must lie within the marks - dimension a - on the guide rail gate - 2 -, on both sides.
The guide channel - 2 - must be located in the guide rails (cannot be moved by hand).
- Slide guide upper part - 1 - (from front to rear only) centrally between the marks.
- Install drive in this position ("0" position).
Then check "0" position.