EVAP Canister System Overview

EVAP Canister System, Overview







1. Vacuum reservoir
- Below right front wheel housing liner
2. Pressure retention valve
- For fuel tank ventilation
3. Change-over valve
4. EVAP canister
- Under wheel housing liner in right rear wheel housing
5. Leak Detection Pump (LDP) -V144-*
- At EVAP canister
6. Air filter for diagnostic pump
7. Tank lid unit
- With rubber cap
8. Fuel tank
9. Fuel pump (FP) unit
10. Check-valve
- Installation position: Arrow points in direction of flow
11. Intake manifold before turbocharger
12. Fuel pressure regulator
13. Fuel rail with fuel injectors
14. Intake manifold
15. Throttle Valve Control Module -J338-
16. Fuel filter
- Installation position: Arrow points in direction of flow
17. Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-*
- In right engine compartment above wheel housing liner
- Installation position: Arrow points in direction of flow
18. Test connection
19. Gravity valve