Steering: Testing and Inspection

VAS 5051 A, connecting and selecting functions

Special tools, testers and auxiliary items required

Vehicle Diagnosis, Testing and Information System VAS 5051 A:

- ^ Diagnostic cable VAS 5051/5A or
- ^ Diagnostic cable VAS 5051/6A

CAUTION:
^ Test equipment must always be secured on the rear seat during a road test.
^ Drivers must NEVER operate these tools while driving.

- Remove cover for Data Link Connector (DLC).





- With ignition switched off, connect Vehicle Diagnostic, Testing and Information System VAS 5051 A with diagnostic cable VAS 5051/5A or diagnostic cable VAS 5051/6A to Data Link Connector (DLC).





- Switch on Vehicle Diagnosis, Testing and Information System VAS 5051 A - arrow -.

Vehicle Diagnosis, Testing and Information System VAS 5051 A is ready for operation when a picture (photo) of a vehicle is displayed.

- Switch on ignition.
- Touch Guided Fault Finding on screen.
- Select one after another:
^ Brand
^ Model
^ Model year
^ Version
^ Engine identification
- Confirm entered data.

Note: Wait until tester has checked all control modules installed in the vehicle.

- Press Go to button and select "Function/component selection" function.

Note: Now follow the displays on screen to begin the desired functions.