Instrument Cluster, Coding (Function 07)

Data Bus on Board Diagnostic Interface -J533- From 10.00, Coding (Function 07)

- Connect VAG 1551 Scan tool (ST), input address word 19 "Gateway" and then press button until "Select function XX" is shown in display.
- Press buttons -0- and -7- to select function "Code control module".

Indicate on display:

Rapid data transfer Q
07 - Code control unit

- Press -Q- button to confirm input.

Coding

Indicate on display:

Code control module
Enter code number XXXXX (0-32000)

- Enter code number compiled from code table.

Control modules to power-train databus Code:
ABS activated 00002
Airbag activated 00004
ABS and Airbag activated 00006

NOTE: Transmission control module message is not codified because it is automatically learned.