DTC Memory, Erasing (Function 05)

DTC Memory, Erasing (Function 05)

NOTE: The vehicle system tester V.A.G 1552 can be used instead of the scan tool V.A.G 1551, however a print-out is not possible.

- Connecting scan tool, initiating On Board Diagnosis (OBD).
Scan Tool Connecting
On Board Diagnosis (OBD) For the Central Locking System, Initiating

Requirements:
- Malfunction is corrected
- Functional check has been carried out
- DTC memory interrogated again

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5- (the function "Erase DTC memory" is entered with 05).

Indicated on display:

Rapid data transfer Q
05 Erase DTC memory

- Confirm entry with -Q- button.

Indicated on display:

Rapid data transfer ->
Fault memory is erased

- Press -> button.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- If this appears in the display, the test sequence has malfunctioned.
- Adhere exactly to test sequence: first of all check DTC memory, then erase memory.

- Press buttons -0- and -6- to end the output.

Indicated on display:

Rapid data transfer Q
06 End output

- Confirm entry with -Q- button.

Indicated on display:

Rapid data transfer HELP
Enter address word XX

- Switch off ignition.
- Disconnect connection to scan tool V.A.G 1551.