Wiper and Washer Systems: Locations

Windshield Wiper System, Assembly







CAUTION: Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.
- Disconnect negative ( - ) battery terminal.
- When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.

1. Wiper blade
- Adjusting rest position
2. Wiper rubber
3. Connecting lever
4. Connecting rod
5. Crank
6. Wiper motor
7. Hex nut M8
- 20 Nm (15 ft lb)
8. Wiper frame
9. Securing bolts M6
- 5 Nm (44 in. lb)
10. Protective sleeve
11. Cover cap
12. Hex nut M8
- 20 Nm (15 ft lb)
13. Wiper arm
14. Retaining clip