Premium 5.5 (SDARS) (Incl. Monsoon)

Radio "Premium 5.5 (SDARS)" (Incl. Monsoon), Multi-Pin Connector Assignments,







Terminal assignment of multi-pin connectors I, II, III at rear of radio

Multi-pin connector I, -T20-, consists of 3 separate connector parts

Multi-pin connector I, -T20- part 1, yellow*
1. Open (LR + Line Out)
2. Open (RR +Line Out)
3. Open (Audio Ground)
4. Open (LF + Line Out)
5. Open (RF + Line Out)
6. AMP Control

Multi-pin connector I, -T20- part 2, green*
7. Open (Diff. Cell In)
8. Clock remote display
9. Data remote display
10. Enable remote display
11. SWC Digital Bus
12. Open (Diff. Cell Input)
*) Where applicable

Multi-pin connector I, -T20- part 3, blue
13. CD changer - DATA IN
14. CD changer - DATA OUT
15. CD changer - CLOCK
16. CD changer - Positive (B+) supply
17. CD changer - Control signal
18. CD changer - Ground (GND) supply
19. CD changer - Line out, left
20. CD changer - Line out, right

"Premium 5.5 (SDARS)" Multi-pin connector II, -T8a-, 8-pin, brown
1. Speaker + right rear
2. Speaker - right rear
3. Speaker + right front
4. Speaker - right front
5. Speaker + left front
6. Speaker - left front
7. Speaker + left rear
8. Speaker - left rear

"Premium 5.5 - Monsoon (SDARS)" Multi-pin connector II, -T8a-, 8-pin, brown
1. Amplifier + right rear speaker signal
2. Amplifier - right rear speaker signal
3. Amplifier + right front speaker signal
4. Amplifier - right front speaker signal
5. Amplifier + left front speaker signal
6. Amplifier - left front speaker signal
7. Amplifier + left rear speaker signal
8. Amplifier - left rear speaker signal

Multi-pin connector III, -T8-, 8-pin, black
1. Signal for anti-theft alarm system
2. Open (Mute)
3. Data Link Connector (DLC) K wire
4. Ignition switch -S- contact
5. Positive (B+) supply, terminal 30 (control input for "SAFE" display/anti-theft)
6. Illumination, terminal 58b
7. Battery positive (B+) supply (terminal 30)
8. Ground (GND) supply