Headlights, Assembly

Headlights, Assembly







CAUTION:
Before beginning repairs on the electrical system:
- Obtain the anti-theft radio security code.
- Switch off all electrical consumers.
- Switch off ignition and remove ignition key.
- Disconnect negative ( - ) battery terminal.
- When disconnecting and reconnecting battery terminals, observe all applicable Notes and torque specifications, as well as instructions on performing OBD program and electrical system function checks as specified.

NOTE: After performing any repairs or service that could affect headlight aim, check/adjust aim.

1. Gasket
- Replace if damaged
2. Cover
3. Retainers
- Qty. 4
4. Headlight housing
5. Gasket
- Replace if damaged
6. Harness connector
- Clipped into headlight housing
7. Electrical connector for high beam bulb
8. High beam bulb
- H1 12 V, 55 Watt
9. Electrical connector for low beam bulb
10. Low beam bulb
- H1 12 V, 55 Watt
11. Headlight glass
- Replace if gasket is faulty
- Removing: unclip retainers Pos. 3