Component Locations Overview - II

Component Locations (Vehicles With Engine Code BEW) Overview







The following components are not depicted in the component locations overview:

Throttle Position (TP) sensor-679- and sender -2- for accelerator pedal position -G185-*
- In footwell, at accelerator pedal

The following components are displayed in the Component location overview:
1. Engine Coolant Temperature (ECT) Sensor -G62-*
- For control module for Diesel-Direct Fuel Injection System
- With Engine Coolant Temperature (ECT) Sensor -G2-
- If necessary, release pressure in cooling system before removing
2. Intake manifold flap
- With Motor for intake flap -V157-*, checking.
3. EGR Vacuum Regulator Solenoid Valve -N18-*
4. Positive Crankcase Ventilation (PCV) Heating Element -N79-
5. Diesel Direct Fuel Injection (DFI) Engine Control Module (ECM) -J248-*
- Checking voltage supply.
6. Intake Manifold Runner Control (IMRC) Valve -N316-
7. Exhaust Gas Recirculation (EGR) Cooler Switch-over Valve -N345-*
8. Wastegate Bypass Regulator Valve -N75-*
9. Mass Air Flow (MAP) Sensor -G70-*
10. Harness connector
- For Valve for pump/injector, cylinder 1 -N240- to Valve for pump/injector, cylinder 4 -N243-
11. Engine speed sensor -G28-*
12. Fuel Temperature Sensor -G81-*
13. Harness connector
- For Engine Speed (RPM) Sensor -G28-
14. Harness connector
- For Camshaft Position (CMP) Sensor -G40-
15. Camshaft Position (CMP) sensor -G40-
- For camshaft position
16. Charge Air Pressure Sensor -G31-* with Intake Air Temperature (IAT) Sensor -G42-*
- Checking Charge Air Pressure Sensor.
- Check Intake Air Temperature (IAT) sensor.