Different Steering Columns

Different steering columns





Steering columns - A - manufactured by Nacam were implemented up to > 01.00. Steering columns - B - manufactured by Presta have been implemented since 02.00 >.

The height and longitudinal adjustment function is identical on both steering columns.

Both versions are available as replacement parts.

When replacing steering column, only one of the same manufacturer may be used.

The steering column should be checked for which version is installed in the vehicle before removing.

Steering columns, distinguishing characteristics

A - Steering column manufacturer: Nacam > 01.00





1. Secure for transport
^ Only remove it after steering column has been installed.

2. Steering column
^ Steering column is not visible in this area.

3. Universal joint shaft for steering column
4. Hex bolt
^ M8 x 25
^ Tightening torque
^ Is screwed in without locking compound

B - Steering column manufacturer: Presta 02.00 >





1. Secure for transport
^ Only remove it after steering column has been installed.

2. Steering column
^ Lower section of steering column is visible

3. Universal joint shaft for steering column
4. Hex bolt
^ M8 x 25
^ Tightening torque
^ Must be screwed in with locking compound
^ Use locking compound D 000 600