Operation CHARM: Car repair manuals for everyone.

Procedures



Door Seal Overview (Convertible)

Door seals are equipped at the factory with sealant, applied to door flange and then rolled on.

NOTE:
- During removal of the seal, sealant is distributed on interior side of seal and flanks are bent up easily. If the seal is re-installed, the sealing performance and proper seating are no longer guaranteed.
- For this reason, every completely removed seal must be replaced with a so-called "hammer-stroke seal".
- For partially removed seals, seal flanks must be pressed together before installation.

Assembly overview







1 - Internal door seal
- To install seal, begin in upper radius of door cut out.

2 - Dust seal
3 - Clip
- Inserted into door seal