Air Cleaner Housing: Service and Repair

Air Filter, Disassembling And Assembling (Vehicles With Engine Code BEV, BGD)







1. Mass Air Flow (MAP) sensor -G70-* with Intake Air Temperature (IAT) sensor -G42-*
- Terminals of sensor and connector are gold-plated
- Check Mass Air Flow (MAF) sensor.
- Check Intake Air Temperature (IAT) sensor.
2. Seal
- Replace if damaged
3. Upper section of air filter
4. From upper part of intake manifold
5. From cylinder head cover
- For crankcase ventilation
6. Vacuum hose
Vehicles with engine code BDC, BGD
- To upper part of intake manifold.
Vehicles with engine code BEV
- To connecting pipe.
7. Positive Crankcase Ventilation (PCV) heating element -N79-
- For crankcase ventilation
- Check voltage supply for PCV heating element between terminals 1 and 2 with engine running

Specified value: at least 11.5V

8. Intake hose
- Check for secure fit
- Note installed position
9. Resonator
10. Spring clip
11. To air pipe for air cleaned fuel injectors
Only for vehicles with engine code BDC
12. 6 Nm
13. Air guide
14. Filter element
15. 10 Nm
16. Air guide
- Secured to front wheelhousing
17. Gasket
18. Lower section of air filter
19. Intake hose
- Check for secure fit
- To disengage, squeeze together at front
Vehicles with engine code BDC, BGD
- To Secondary Air Injection (AIR) pump motor -V101-.
Vehicles with engine code BEV
- To Secondary Air Injection (AIR) pump motor -V101-.