Safety Precautions - I

Safety Precautions

To prevent injuries to persons and/or damage to the injection and ignition system, the following must be observed:
- Do not touch or disconnect ignition wiring when engine is running or turning at starter speed.
- Switch off ignition before connecting or disconnecting injection and ignition system wiring as well as measuring instrument cables.

Observe following if test and measuring instruments are required during a test drive:
- Test and measuring instruments must be secured to rear seat and operated by a second person from this location.

If test and measuring instruments are operated from front passenger's seat and the vehicle is involved in an accident, there is a possibility that the person sitting in this seat may receive serious injuries when the airbag is triggered.

If the engine is to be turned at starter speed without starting:







- Disconnect connectors from ignition coils with output stages - arrow -.







- Pull fuse No. 32 out of fuse holder.

NOTE: Removing fuse 32 interrupts the voltage supply to the injectors.