EVAP Canister System Components, Removing and Installing

EVAP Canister System Components, Removing And Installing







1. Bracket for diagnostic pump
- Bolted to chassis
2. Bolt
3. Washer
4. Leak Detection Pump (LDP) -V144-*
- Under wheel housing liner in rear left wheel housing
5. Connector
- 3-pin
6. Clutch
- To disengage, squeeze together at front
7. Connection hose
- Pressure side
8. Connection hose
- Intake side
9. Air filter for diagnostic pump
10. Connecting piece
11. Connection tube
12. EVAP canister
- In spare wheel well at vehicle floor
13. 15 Nm
14. 10 Nm
15. To Evaporative Emission (EVAP) Canister Purge Regulator Valve -N80-
- In engine compartment at air filter
16. Vent line
Vehicles with engine code AEB:
- From gravity valve at fuel tank
Vehicles with engine code ATW:
- From gravity valve at fuel tank
17. Vacuum line
- To check valve at intake manifold
18. Connection hose
- Vacuum side
19. Angled connector
20. Bracket for diagnostic pump
21. 2 Nm
22. 8 Nm