Battery, Transmitter/Receiver Unit - Fuse and Wiring Harness, Overview

Battery, Transmitter/Receiver Unit - Fuse And Wiring Harness, Overview







1. Positive connection
- Red wire with suitable connection.
2. To terminal 15a
- Connection to terminal 15a:
- Ensure wire is protected by fuse.
- Fuse protection max. 15A
3. Antenna Ground (GND)
- Ensure correct Ground (GND) connection to body.
- The antenna location must be treated with suitable corrosion protection.
4. Transmitter/receiver antenna
- Fitting locations.
5. Shielded antenna wire
- Wire with coaxial connector
6. Telephone or two-way radio transmitter/receiver unit
7. Wiring harness
- Voltage supply positive via red wire 2.5 mm cross section.
- Voltage supply negative via brown wire 2.5 mm cross section.
- If necessary, wire to terminal 15a via black wire 1.5 mm cross section.
8. Fuse holder
- Install next to battery.
9. To Starter
10. Battery
- Rear center of engine compartment, inside the plenum.
11. Negative (-) wire
12. Body Ground (GND)