Programming and Relearning

Adapting Functions And Components

Special tools, testers and auxiliary items required







- Vehicle diagnostic, testing, and information system VAS 5051
- Diagnostic cable VAS 5051/5A or VAS 5051/6A
- Diagnostic cable VAS 5051/1 or VAS 5051/3 can also be used.

Work sequence
- Connect Vehicle Diagnosis, Testing and Information System VAS 5051 as follows:







- Connect diagnostic cable VAS 5051/5A connector or VAS 5051/6A to Data Link Connector (DLC).







- Switch tester on - arrow -.







The tester is ready for operation when a picture of a vehicle is displayed.

- Switch ignition on.
- On display, select field "Guided Fault Finding".
- Select in order:
- Type
- Model year
- Variations
- Engine code

- Confirm entered data.
Wait until the tester has interrogated all available control modules in the vehicle (vehicle system test).

Once all control modules have been checked:
- Press "Go to" button.
- Select "Function/component selection".
- Then press "Drivetrain (Rep. Gr. 01; 10 to 26; 28 to 39)".
- Select engine code.
- Select appropriate repair group, based on what is to be tested.
- On display, select in "Functions" or "Electrical components" function or component that is to be tested.