Reading

Read Measured Value Block

WARNING:
- Only visual check of wiring.
- Do not perform electrical continuity tests or measurements to ignition circuits.
- Only check wiring with ignition switched off.

Indicated on display

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -8- (08 initiates the "Read Measured Value Block" function).

Indicated on display

Rapid data transfer Q
08 - Read Measured Value Block

- Confirm with -Q- button.

Indicated on display

Read Measured Value Block HELP
Input display group number XXX

- Select display group number and confirm entry with -Q- button.

Indicated on display (1...4 = display fields)

Read Measured Value Block 1 ->
1 2 3 4

The explanation of the individual display groups on the display is found in the evaluation of display group numbers. Evaluating Measured Value Blocks

If the displayed values in all display groups are "correct."

- Press -> button.

Indicated on display

Rapid data transfer HELP
Select function XX

NOTE: Check DTC memory after completing the function "Read Measured Value Block".