Windshield Wiper & Washer System

General Information

Several different designs of washer hose couplings are used in the windshield, rear window and headlight washer systems.

Each coupling requires specific actions in order to disconnect and reconnect.

Windshield and rear window washer system







- Disconnect by pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together until felt and heard to engage.







- Disconnect by turning lock ring -1- through 90 degrees -arrow- and then pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together and rotating locking ring -1- until it engages.







- Disconnect by lifting lock ring -1- in direction of -arrow- and then pulling apart both halves of coupling.
- Reconnect by pushing both halves of coupling together and clipping locking ring -1- until it engages.

Headlight washer system







- Disconnect by depressing clip -1- in direction of -arrow- and then separating coupling from the jet.
- Reconnect by keeping clip -1- depressed while pushing coupling onto jet until it engages.
- Check for proper fit by attempting to separate coupling without depressing clip.